Hello everyone I recently became a ccna and currently working on my ccnp route exam, I'm setting up a dvr system in my home and I wanted to know if this is possible. I want to access the ip address within a subnet on port 8021 from the internet on the laptop connected to the dvr.
I have a dchp server program running on the pc that provides address for Ethernet port of the laptop to the Ethernet port of the dvr. I can connect to the linksys router on the opposite side of the house using the wireless card. and access the internet
1. This all has to be wireless
2. The dvr does not support wireless devices or drivers
3. I'm able to connect to the dvr and control the system currently with the remote dvr software
4. Running windows xp and using a free ware DHCP server program
5. The address give by the modem is DHCP but I don’t mind changing that
I’m thinking its possible with port forwarding and a more advance router, I don’t know what to do about the DHCP server running on the laptop and wireless card is getting a
ip address from the wireless routers.
image of the network setup: https://learningnetwork.cisco.com/servl ... etwork.JPG
Thanks for taking your time to read my post
thanks for your help
